NVR Alarm Inputs and Relay Outputs: Plan the Interface First
Match recorder terminals to documented sensor and load requirements, then test the complete event path before handover.
Match recorder terminals to documented sensor and load requirements, then test the complete event path before handover.
Prepare the approved firmware, recording interruption and recovery process, then verify the actual installation before closing the work order.
Turn a vague cloud request into a documented recording, access and recovery design with confirmed CASE software scope.
Confirm release and device support, agree customer access and demonstrate the actual CASE Connect functions before signing off handover.
Separate recording, desktop viewing and central-management requirements before specifying CASE NVRs or CASE Station.
Commission the supported event searches, narrow the incident window and verify the original video before exporting a clip.
Choose where analytics run, confirm the supported event chain and test processing capacity and useful results on the installed system.
Two 4MP views in one housing, one cable and one mount, but two channels on the recorder. What CS-I85N L-180 and CS-I8RN S-2.8mm print, how to count them, and when a stitched 180° unit is the better call.
Discreet is not covert. Where a pinhole camera is appropriate on a commercial site, where privacy rules in the US and Canada stop you, and the printed facts of the CASE pinhole CS-I2PN S-3.7mm. Not legal advice.
The memory slot on a camera covers link outages; it does not replace the recorder. Which card to specify, how long it records, and which CASE SKUs print 512 GB, 1 TB or no slot at all.